SHC
Conditions of Warranty: Please read carefully
SHC
Wheels warrants to the original owner a lifetime structural
warranty on all wheels sold by SHC or its distributors.
Warranty
is only available to the original owner; transfer of
ownership renders all warranties void.
All
warranty returns must be accompanied by the original
bill of sale, no exceptions.
SHC
agrees to repair or replace at SHC’ sole discretion
any wheel which is found to have defects in material
and/or workmanship.
All
products subject to a warranty claim will be inspected
by SHC. If the product is found to have failed under
normal use due to defects in material and/or workmanship
the product will be replaced in accordance with the
manufacturer’s warranty.
SHC
is at all times bound by the manufacturers warranty
and at all times the final decision regarding a warranty
claim will be made by the manufacturer of the product.
SHC
will not be liable for any loss or damage; be it incidental
or consequential or of any kind that arises from claims
of warranty, contract or negligence in connection with
the sale, use or repair of any product.
SHC assumes no liability in the event a wheel has been
discontinued or is no longer available.
SHC’
maximum liability shall not in any case exceed the contract
sale price of the products being claimed to be defective
or unsuitable.
In
all warranty claims the Buyer is responsible for and
must prepay all shipping charges.
All
warranty claims are to be shipped prepaid to:
SHC Wheels
474 Bay Street,
Victoria, BC V8T 5H2
Or
as instructed by SHC at the time of the claim.
No
cash refunds of any kind.
Exclusions from
warranty:
Warranty does not apply to any items which have been
misused, neglected or damaged in an accident.
Warranty
does not apply to any product that has been altered
or repaired by any unauthorized persons other than an
approved SHC repair facility.
Important information
regarding chrome wheels:
After
an aluminum wheel is cast, it is partially polished
(face and lip area). It is then submitted to a process
of electroplating which will turn it into a finished
chromed part.
Every
effort is made by the manufacturer to ensure that the
overall quality on chrome wheel finishes fall within
a certain guideline. All of our manufacturers produce
wheels that are considered within the “custom wheel
industry” to be of good commercial quality. (Most our
manufacturers are exceptional)
What
this means to you is that all of our wheels fall within
industry standards and are not expected by any means
to be 100% cosmetically flawless. "Show Quality"
chrome wheels are rarely available from any manufacturer
and if so would cost sometimes two to three times more
than "commercial quality" parts to produce.
Some
minor pits, small chrome burns, chips, scratch marks
underneath the chrome or polishing lines are likely
to occur in some of the wheels and are not considered
blemishes and therefore not entitled for return, exchange
or refund.
A
defective chrome finish would be something that presents
peeling, rust, blistering or bubbling on the polished
areas of the wheels (i.e. face, lip, spokes ... not
on the area where the tire seats or any backside of
the wheel...).
Chrome
finish on SHC Wheels is warranted to be free from defects
in material or workmanship for a period of one year
from the original date of purchase.
The
impact of chrome wheels by things like curbs and potholes
can cause the chrome to start peeling from the wheel
surfaces. If it is deemed that this is the cause of
the chrome failure and there are no defects in the material
or workmanship the wheels will not be covered under
warranty.
Important
information regarding Painted Wheels:
The
paint finish in most aftermarket wheels is of good commercial
quality. While technically correct, some imperfections
may show on the surface of the wheels and are not considered
blemishes. A defective paint finish would be considered
a part in which some face, spokes or lip areas are not
covered by the paint. Uneven surfaces are not considered
blemishes when they are protected / covered by the paint
coating.
 To
download warranty information please
click
here!
Note: You will need Adobe Reader
to download the warranty
document, if you do not have Adobe Reader click the
link
provided.
|
